Optolong L-Pro Filter Review
I’ve recently had a chance to review the Optolong L-Pro filter (2 types) for astrophotography from my light polluted backyard in the city. Unlike many of the filters I used in the past, the L-Pro is suitable for both stock and astro-modified DSLR cameras. (It includes a UV/IR block).
I’ve always had trouble collecting images with an accurate representation of star color when imaging from the city. It’s something I spend a lot of time correcting during the image-processing stage of my projects. My hope is that the Optolong L-Pro filter lives up to its description of allowing more starlight to pass through than a traditional UHC or CLS filter.
(L-Pro = Luminance Professional)
Optolong L-Pro Filter Review
I’ll be using this filter with a Canon 5D Mk II to capture the Pleiades star cluster through a compact refractor telescope. I’ve chosen this target for the L-Pro because I want to showcase its ability to produce natural-looking images of broadband astrophotography targets from the city.
I’ll also show you what you can expect using the L-Pro with a camera lens, as I have both the 48mm filter and clip-in Canon EOS-C (APS-C sized sensor) models. The complete list of astrophotography gear used for this review is listed further down the post.
Since owning the Optolong L-Pro filter, I’ve captured two deep-sky objects through a telescope. The Pleiades star cluster and the Orion Nebula.
Test images using the Optolong L-Pro filter from my backyard
A broadband filter for urban astrophotography
If you are new to this blog, my backyard sky is rated a Class 8 on the Bortle scale – fairly typical conditions of most big cities. If your night sky is darker than this, consider yourself to have an advantage when it comes to astrophotography.
Over the years, I have used many types of filters for astrophotography – mostly using a modified Canon Rebel DSLR camera (XSi, T3i). The type of filters you’ll want to invest in will depend on whether your camera has been modified for astrophotography or not.
This filter is less aggressive than all of the other astrophotography filters I use in terms of blocking light. As a side-effect of retaining natural starlight color, each shot will also expose more skyglow than I am used to with the much more aggressive SkyTech CLS-CCD.
The Optolong L-Pro Filter (Canon EOS-C Clip-in version)
To offset the lack of signal recorded in each shot, I’ll simply increase the overall exposure time (what else is new?). If you want a natural looking astro-image that doesn’t look like it was captured from a red zone – you’re going to have to work for it.
This light pollution filter’s job is to ignore as much artificial light from the city as possible, without interrupting the natural colors of objects in space in your image.
Reducing skyglow for better signal
I rely on light pollution filters for deep sky astrophotography from my backyard and have tested many types of them over the years. Although many of them do an impressive job at isolating light associated with nebulae – broad-spectrum targets such as galaxies, star clusters, and reflection nebulae have been challenging.
With a modified camera like my Canon EOS Rebel T3i, the cool colors in my image are often lost and need extensive correction during post-processing. My hope is that the Optolong L-Pro’s unique optical characteristics help capture the natural looking colors of my deep sky object while reducing enough city glow to produce a quality image.
The Optolong L-Pro Filter clip-in filter in my Canon T3i
I have found that it’s beneficial to use specific filters that offer unique optical characteristics for each type of astrophotography target (reflection nebulae, emission nebulae, globular clusters etc.). It would be great to have one filter that delivers impressive results for all astrophotography targets, but such a filter doesn’t exist.
The Problem with broad-spectrum Targets
I’ve avoided capturing broad-spectrum targets like Pleiades from my city backyard. In fact, my personal best image of this star cluster was captured from a dark sky location about 45 minutes from home. The reason for this is that narrowband filters, and LPS filters like the SkyTech CLS-CCD, do not isolate reflection nebulosity from a washed out sky the way they do with an emission nebula.
It doesn’t mean that a UHC or CLS filter won’t help on broad-spectrum targets like Pleiades or galaxies, they just really mess with the colors. To be more specific, the images have a red cast and the cool colors are often hard to bring back in processing. Despite my stance on “white balance doesn’t matter when shooting RAW”, it has been brought to my attention that using a custom white balance in these situations may make image processing a little easier.
I’ll experiment with this strategy over the coming weeks with the Optolong L-Pro filter. The process involves capturing an image of a white or grey card, through the telescope with the filter in place over the camera sensor. It essentially trains the camera as to “what white should look like”.
My backyard sky before and after using the Optolong L-Pro filter
Equipment used in this post
In this post, I’ll show you the difference between shooting unfiltered with a stock DSLR and with the Optolong L-Pro. For this test, I’ll use the 2-inch version filter in my Canon EOS 5D Mk II.
My list of camera filters has grown over the years, each with their own transmission spectral graph and light suppression qualities. As always, I’ll do my best to give you real-life examples of the filter in use – and save the detailed technical analysis for the Cloudy Nights forum.
|Optolong L-Pro 2” Filter|
|Optolong L-Pro Canon EOS-C Filter|
|Canon EOS 5D Mk II (stock)|
|Canon EOS Rebel T3i (modified)|
|William Optics Zenithstar 73 Refractor|
|William Optics Flat73 1:1 Field Flattener|
|Rokinon 14mm F/2.8 Lens|
|Shoot Remote Shutter Release Cable|
The full-frame stock Canon 5D Mk II was used through my Z73 telescope, while the APS-C Canon T3i (modified) was used with a Rokinon 14mm F/2.8 lens.
A multi-bandpass filter with selective light pollution suppression
The L-Pro is a multi-bandpass filter that suppresses the transmission of select light pollution lines. For example, mercury vapor lamps, sodium vapor lights and even skyglow caused by the oxygen in our atmosphere. The balanced transmission aims to offer great color balance and minimal color cast.
The Optolong L-Pro filter comes in 5 variations:
- Canon EOS Clip-in APS-C
- Canon EOS Clip-in Full Frame
- Nikon Clip-in Full Frame
- 1.25” Round Mounted
- 2” Round Mounted
This filter uses precision off-band blocking in the major emission lines of artificial light pollution (Na 589nm, Hg 435nm, and 578nm). Compare this graph to one on the more aggressive SkyTech CLS-CCD, and you’ll see that it allows more natural color to reach the camera sensor. The specifications for the Optolong L-Pro filter list that it blocks 90% of light pollution emission, with a spectrum of 380-750nm. The isolated light wavelengths this filter records are outlined in the spectrum graph showcased below.
Have a look at how the L-Pro compares to the other broadband light pollution filters from Optolong.
Who should use this filter?
If you’re under moderately light polluted skies on the outskirts of town, this filter will help reduce city glow and help you produce natural looking astrophotography images with great color balance. If you’re like me in a red zone, the L-Pro will help when capturing broadband targets such as galaxies and reflection nebulas.
If you’ve been capturing deep sky images from a light polluted location and have experienced harsh color casts in broadband targets like the Pleiades star cluster and Andromeda Galaxy, the L-Pro may be the solution you’ve been looking for.
Deep Sky Target: The Pleiades Star Cluster
I have chosen to capture an exquisite deep sky object that will showcase the broad spectrum qualities of the Optolong L-Pro filter in a light polluted area. Pleiades (Messier 45) is a well-photographed open-star in the constellation Taurus. It contains a collection of 7 bright blue stars and plenty of reflection nebulosity. A deep long exposure image will also showcase vast amounts of cosmic dust surrounding this cluster.
The final image will include several images that have been stacked to improve the signal-to-noise ratio. From a light polluted area, this can be a great way to offset challenging shooting conditions.
Test Images with a telescope
The test images were captured using a stock Canon 5D Mk II DLSR and a William Optics Zenithstar 73 Refractor Telescope. Each shot is a 90-second exposure at ISO 800. The RAW images have been converted to jpegs, but have otherwise not been processed.
As you can see, not only is the background sky much darker, but the stars are also smaller. Both images were focused using a Bahtinov mask.
The camera I am using for Pleiades image is a stock Canon EOS 5D Mk II. This is my full-frame daytime photography camera that should provide an honest example of what you can expect using stock DSLR with this filter. The camera includes the original IR cut filter which reduces the impact of hydrogen-alpha light collected by the sensor. For reflection nebula targets like M45 without any h-alpha light, a stock camera like this is perfectly capable of producing a cracking image.
I also tested the Canon EOS-C clip-in version of the filter with my modified Canon EOS Rebel T3i. For these photos, I connected a Rokinon 14mm F/2.9 lens in place of a telescope. Up to this point, I’ve only taken a few shots around the backyard but would like to try this filter for some deep sky imaging soon. I regularly use DSLR cameras for deep sky astrophotography through telescopes and lenses, but only when the nights are cool enough. On warm nights, the thermal noise created by the camera sensor can become a problem, and no amount of noise reduction can correct it.
The Camera Filter
The Optolong L-Pro filter I used for this project was the 2” (48mm) round mounted version, which I placed inside the field flattener of my telescope. It threads securely to the William Optics Flat73 flattener, on the telescope-facing side. This is a convenient location to place the filter in the imaging train and has not created any surprise reflections in my images.
To recap, I am using this broad-spectrum filter with a stock DSLR camera. My results are most useful to those looking to capture natural looking color images in moderately light-polluted skies without using an astro-modified DSLR. If you’re imaging location is darker than mine, expect to collect images with a much better signal-to-noise ratio!
The telescope is a William Optics Zenithstar 73 APO. It’s a compact doublet refractor with a focal length of 430mm. The ultra-wide field of view this telescope offers is particularly evident when shooting with a full-frame camera like the 5D Mark II.
At F/5.9, this apochromatic refractor is comparable to a 400mm telephoto camera lens like the Canon 400mm F/5.6L. Focal ratio is an important aspect of telescopes and lenses for astrophotography – as it will have a large impact on the signal-to-noise ratio of your images.
For large (broad spectrum) deep sky targets like the Pleiades star cluster, Andromeda Galaxy, and Triangulum Galaxy, the combination of a stock full-frame DSLR and a telescope like this can create some incredibly wide shots that capture the entire object with room to spare.
My Canon 5D Mk II and Zenithstar 73 – pointed towards the Pleiades
The Telescope Mount
The Sky-Watcher HEQ5 Pro SynScan computerized telescope mount performs exceptionally well at this focal length, even without the use of autoguiding. Accurate polar alignment and balance are imperative for successful imaging using an EQ mount without the aid of autoguiding.
Unfortunately, my balance isn’t perfect in this configuration. The heavy 5D Mk II puts stress on the mount in the declination axis because I need a longer dovetail bar for the Z73. However, it doesn’t appear to be much of an issue when shooting 90-second exposures.
The images are firing away automatically, thanks to an aftermarket remote shutter release cable. This lets me set a sequence of shots at my desired length, with a little break to let the sensor cool in between. I’ve set the automation sequence to collect 50 x 90-second exposures, but I’ve been checking in on the subs ever 30 shots or so.
Camera Settings for Deep Sky
For my final image of Pleiades, I’ve decided to shoot rather conservative images of 90-seconds each, at an ISO of 1600. This time of year is much cooler at night with temperatures dropping to almost zero. I estimate the camera sensor to be recording my light frames at approximately 15 degrees C.
The data collected using these settings falls in the middle of the histogram, without clipping any information in the darks or highlights. The images could be shot using longer exposures, but I want to reduce the number of subs that could suffer from the periodic error of the telescope mount.
Camera Setting used for The Pleiades image:
- Camera Mode: Bulb (Manual)
- Image Format: Raw
- ISO: 1600
- White Balance: daylight
- Exposure: 90-seconds
Deep Sky Results
As you can clearly see from the single image frame comparison image I posted, the Optolong L-Pro filter makes a huge difference in terms of reducing light pollution. This certainly helped me collect data with better contrast and less skyglow for my image of Pleiades.
As always, increasing the overall integrated exposure time is my greatest ally in the battle against city light pollution. To create an image with a signal-to-noise ratio comparable to a dark sky site, I need to collect 4-10X the amount of data. Image processing is still a challenge, but I am used to it.
M45 – The Pleiades Star Cluster | Optolong L-Pro filter and Canon 5D Mk II
My final image of The Pleiades includes 4 Hours and 10 minutes of total integrated exposure time. Each 90-second, ISO 1600 light frame was stacked in DeepSkyStacker to improve the signal-to-noise ratio of my final image. Final image processing was done in Adobe Photoshop using a number of plugins (listed here).
Test Images with a modified DSLR
For the image comparison below, a modified Canon EOS Rebel T3i was used. The shots were 30-seconds each on a fixed tripod. I intentionally included the light from my back window to showcase the subtle light suppression qualities of the L-Pro filter.
“Daylight” white balance was used with an ISO of 800 for both the unfiltered and filtered shots. Notice the difference in the street light reflections in the trees? It appears as though this filter is reducing the bright glow of the LED lighting in my neighborhood.
The Optolong L-Pro used with a modified Canon DSLR and wide-angle lens
The image I shared earlier in this post was taken with the Optolong EOS-C filter in my Canon 5D Mk II. I was able to place this APS-C sized filter in my full-frame camera and attach the Rokinon 14mm F/2.8 lens on top. I wouldn’t recommend this configuration, but it is possible. I suspect this causes some serious vignetting, but it wasn’t overly obvious in my shot.
Because the L-Pro creates a rather natural looking image, this would make a great choice for Milky Way nightscape photography. It could help tame any surrounding light pollution without creating challenging color correction issues to deal with in post-processing.
I am quite pleased with the effectiveness of the Optolong L-Pro filter from a city sky and thrilled with the image of Pleiades I was able to produce. The 2-inch round mounted version fits neatly inside of my field flattener, allowing me to connect any type of camera I want.
It would be interesting to compare the difference between a complete broadband deep sky project shot without a filter versus one using the L-Pro. I was not willing to soak this amount of precious time into an unfiltered image, but I’d be interested to see the comparison. My thoughts are that the star-bloat from an unfiltered shot alone is enough of a reason to employ a broad spectrum light pollution filter like the L-Pro.
The Orion Nebula captured in broadband with the 2″ Optolong L-Pro filter
I hope that my review of Optolong L-Pro filter gives you a better idea of what to expect. Until next time, clear skies!