Deep Sky Astrophotography Step-by-Step Walkthrough

deep sky astrophotography

In this post, I’ll break down everything you need for deep-sky astrophotography with a telescope. I’ll cover each piece of gear I use, and explain how it can be used to capture beautiful deep-sky images of space from your backyard.

astrophotography equipment

Updated Version (2023): Deep-Sky Astrophotography How-To (Start to Finish)

Deep-sky astrophotography is a rewarding and fulfilling hobby, especially once you’re able to achieve impressive results from your own home. This post aims to give beginners a better idea of what they need, and what they can expect to accomplish.

I’ll be setting up from scratch, and talk about each piece of gear used, so you can replicate my process. I’ll warn you right now my methods are by no means “the right” way to do this, it’s just the way that works for me.

If you are looking for an in-depth overview of every piece of gear I use for astrophotography, be sure to check out my astrophotography equipment guide. This provides descriptions for each part of the deep-sky astrophotography process, from attaching the camera, to powering the telescope mount. 

Deep Sky Astrophotography Walkthrough

The following video takes you through my current deep-sky astrophotography routine step-by-step. For a more detailed description of the process, keep reading!

First things first, if you’re brand new to deep sky astrophotography, here’s how it works. I use a tracking equatorial telescope mount to compensate for the rotation of the Earth. Because the night sky slowly rotates throughout the night, we need to “freeze” the sky in place in order to capture a long exposure image.

A long exposure photo of 1-minute or more will collect much more light on an object in space than you could ever see with your naked eye alone. This detail is collected onto the camera sensor, and can then be processed to pull out even more color and detail.

Elephant's Trunk Nebula

The Elephant’s Trunk Nebula in Cepheus.

When it comes to deep-sky astrophotography, you can consider the telescope to act as the camera lens. The focal length and aperture offer you the power needed to get a close-up look of some incredible deep-sky objects in space. In general, the most important aspect of deep-sky astrophotography is to collect as much data as possible – good data.

It needs to be sharp, well-exposed, and well framed. With good data, the image processing stage is a lot of fun. With enough overall exposure time, your image will benefit from a strong signal-to-noise ratio.

You can learn more about the basics of deep-sky astrophotography in the “get started” section of this website. For now, I’ll focus on what you need to start capturing quality data from home.

deep sky astrophotography walkthrough

Before Getting Started

The last thing you want to do is spend time carefully setting up all of your gear on a night when the weather forecast is not promising. I usually don’t set up my equipment unless I am confident the sky will be clear until dawn. I monitor a variety of weather forecasting apps to see if the sky will be clear during the night from my location.

clear outside

I have found that the most accurate tool to forecast a clear night sky is Clear Outside by First Light Optics. I use the Android app version on my smartphone. The app includes several useful metrics including visibility, wind direction, estimated sky quality, and more. I like the low, med, high cloud format and have found it to be astonishingly accurate.

The Clear Sky Chart is another great tool to use, but I find the forecast to be a little optimistic for the most part. Oftentimes, the forecast looks better on the clear sky chart than it does on Clear Outside. This tool is an online webpage rather than an app, but it has an impressive amount of locations across the world listed. Just Google your location + clear sky chart.

Related Post: The 20 Best Stargazing Apps for Your Smartphone

Step 1: Powering the Gear

We need to power the equipment, so I usually run an extension cord (or two) out to my imaging location in the backyard. Many people use a portable battery pack to power their gear, and so do I when I don’t have access to electricity.

You can save some serious cash by building your own battery pack using a deep-cycle marine battery and an inverter. I bought one of those battery booster packs from the hardware store for convenience – but they don’t last long and are overpriced.

The model I use is a Motomaster Eliminator 600W (similar to this style) and it has enough juice to power all of my equipment for 1 night. After that, it’ll need another full charge to reliably go another night. I’ve had batteries die on me in the past, and it’s a heartbreaking moment.

Related Post: Choosing a Portable Battery for Your Telescope

Step 2: Level the Tripod Mount

An astrophotography telescope mount must sit on a tripod, or in my case a tri-pier. A rock-solid base for the equatorial tracking head of the mount is essential. You’ll need to confirm that it is level and secure to avoid headaches later on.

Equatorial Mount

Many people build a custom concrete pier and fasten their tracking mount to it for the ultimate stable platform. This, of course, requires a permanent spot for your equipment. I’ve thought about constructing a small observatory in my yard, but I’ve decided to wait until I have a little more property to work with.

No matter what size of tripod or pier you use for astrophotography, you need to make sure that it won’t slip or move throughout the night.

Step 3: An Equatorial Mount

Many astrophotography mounts include a built-in bubble level, which comes in really handy if you often set up in new locations. For the current mount that I use, I simply adjust the length of the tri-pier legs until the mount head is as level as possible.

The astrophotography mount I currently use is an iOptron CEM60, which was generously loaned to me from Ontario Telescope and Accessories. It’s a center-balanced equatorial mount that uses a magnetic gear system.

Update 2023: I primarily use a Sky-Watcher EQ6-R Pro, or ZWO AM5 mount for astrophotography these days. The iOptron CEM60 is a fantastic equatorial mount, but it may be difficult to find now. 

iOptron CEM60

The mount moves the telescope in 2 axes, right ascension (RA) and declination (Dec). It allows me to point at any deep sky object that isn’t obstructed by trees or houses in my backyard.

Once it’s centered on the object, it will track it and keep it completely still so I can photograph it. (Autoguiding improves this, but I’ll cover that momentarily) The iOptron CEM60 is a GoTo mount, which means that I can enter the target name into the keypad, and then the mount will slew the telescope to it for me.

Recommended Telescope Mount Options:

 

telescope mounts

Entry Level: Sky-Watcher Star Adventurer GTi

Intermediate: Sky-Watcher EQ6-R Pro

Professional: Software Bisque Paramount ME II

Step 4: Polar Alignment

Accurate polar alignment is crucial for a successful deep-sky astrophotography image. The process of polar-aligning a telescope mount for astrophotography may sound difficult to achieve at first, but it’s really not that complicated.

The reason I mention it at this stage is that you’ll need to roughly have your telescope mount polar aligned when setting it up. Meaning, the counterweight shaft should be pointing directly north. Because I am in the northern hemisphere, I use Polaris, the north star, as a guide to accurately polar align the mount.

polar alignment

If you live in the southern hemisphere, or can’t see Polaris, there are alternative ways to polar align. Software-assisted methods such as drift alignment can help. I’ve used a polar alignment routine in a program called SharpCap. PHD2 guiding (which ill cover shortly), also has a useful drift alignment tool.

The way I do it, is to use a simple app on my phone (PolarFinder) to tell me exactly where Polaris needs to be in my polar finder scope to be polar aligned from my location. It uses my GPS coordinates and places the star in the correct position for my exact location and the current time.

Then, it’s just a matter of matching up what the app tells me on the mount by adjusting the alt-az knobs. The entire process should only take about 2 minutes once you are used to it. If you’re really not interested in this manual process, or can’t see Polaris. You should probably check out the QHY PoleMaster.

polemaster polar alignment

Using the QHY PoleMaster to accurately polar align my telescope mount.

Step 5: Balancing the Telescope

Now that we’re polar aligned, we can get to the fun part – mounting the astrophotography telescope. Along with being polar aligned, balance is a major factor to consider when setting up your rig.

Most equatorial mounts include a counterweight, which I’ll need to use to balance this 20-pound refractor telescope. You need to balance the scope in both axes so that the mount doesn’t have to work any harder than it needs to when slewing and tracking objects in the night sky.

astrophotography how to

The telescope I’ll be using is a William Optics Fluorostar 132. It’s an apochromatic triplet refractor, which is one of the best telescope types to use for the purposes of astrophotography. It has a focal length of 925mm and an f-ratio of F/7.

A telescope like this has enough aperture to pull in some serious light and get an up-close look at some of the most impressive deep-sky nebulae. If you are looking to purchase a telescope for deep-sky astrophotography, be sure to review my list of the best astrophotography telescopes available in 2023. 

We need to attach the imaging payload (the camera) to the telescope, along with the autoguiding system for an accurate overall weight to balance. This is the payload that will need to be tracking smoothly while the photos are being taken. Even the distance the focuser is from the tube will make a difference in the balance, so there may be some trial and error here.

The closer your imaging payload is to the maximum capacity of your mount – the more balance comes into play. For reference, the CEM60’s 60-pound payload capacity is very forgiving with my relatively light 25 lb imaging gear.

In general, your mount’s payload capacity should ideally be double the weight of your astrophotography gear. This may seem excessive, but long focal lengths and long exposures demand the greatest of tracking accuracy. If you haven’t taken the time to balance your telescope, even the slightest imbalance may come back to haunt you over time.

Step 6: The Imaging laptop

There have never been so many great options for controlling your camera or mount remotely for astrophotography as there are now. 

Dedicated astrophotography computers, mini pcs, and good old-fashioned laptops. I’ve been using the same laptop since I started taking images of space back in 2011. It runs Windows 7, and all of the astrophotography software needed to run a successful imaging session.

laptop computer

The Astrophotography Software I Use:

The computer has software installed for controlling the camera, the mount and of course an internet connection. I can remote into this laptop from in the house using Team Viewer to check up on things from inside the house.

Update 2023: I now use the ZWO ASIAIR Plus and its dedicated smartphone app to run a deep-sky imaging session.

Step 7: Autoguiding Setup

Now, let’s talk about this smaller telescope riding atop the big one. This is called a “guide scope”, and its job is to help the mount track with even greater precision.

I’ll attach a small camera into this telescope, which will feed an image to my computer with a looping image of stars. Then, my computer will communicate with the mount to make small adjustments in periodic error for improved tracking accuracy.

autoguiding

It sends guide pulses to the mount to based on the tiny movements it read from the guide star. This is called autoguiding, and it can be the difference between the ability to capture a 30-second exposure and a 5-minute exposure.

For my upcoming task of star alignment, I’ll use an eyepiece in this little telescope before attaching the camera. It’s a 32mm eyepiece – that offers a 52-degree wide field of view. This is beneficial for the next step of my process.

Step 8: Star Alignment

With the mount leveled, polar aligned, and the telescope balanced. We can actually turn this sucker on. With this mount, I need to first set the “zero position“, with both axes in the home position.

After that, I’ll begin a simple star alignment routine that calibrates the mount to have precise pointing accuracy.

This means that when I punch in the deep sky object I want to image, I can be sure that the telescope will land on it and put it dead center in the frame.

Certain objects are extremely dim, so it would be impossible to know if I have the telescope pointed at it without taking a series of test exposures. This can take precious time away from imaging on a clear night – so take the time to properly star align your mount first.

star alignment routine

I personally don’t mind this stage of the process, because I honestly enjoy a little time actually looking through the telescope and getting some minor physical activity.

But I understand that there are those of you out there that are either tired of this process or have mobility issues. For these folks, I suggest using a plate solving software aid such as Astro Tortilla.

The manual process of star alignment involves slewing to 2 or 3 bright stars and centering them in first the guide scope, and then through the primary imaging telescope. Since I’ll be pointing at some of the brightest stars in the sky, I like to perform my focus routine at the same time.

Step 9: Focus and Camera Control

I like to use the live-view image from the camera during star alignment to help center the stars. Rather than centering the star in an eyepiece, I’ll jump into my camera capture software to make this process easier and more precise.

The software is called Astro Photography Tool (APT for short).

Astro Photography Tool

The Astro Photography Tool Camera Control Software Interface

A camera control software like this not only lets you automate the length of each image and number of shots to take, but they also include features to help with focus, framing, and much more.

A dedicated astronomy camera like the one I’ll use tonight does not include a display screen with an image the was a DSLR does. This means that running an additional software tool to run the camera is necessary.

To focus, I use a tool called a Bahtinov mask that creates a star diffraction spike pattern on stars that are close to being focused. During my 3-star alignment routine, I roughly center the star in the wide field guide scope visually, and then use the live-view loop with the Bahtinov mask to both center the star in the primary imaging scope, and set my focus.

how to focus

What you’re aiming for is a centralized spike between the X. Next, I’ll talk about the camera itself.

Once you’ve found the best focus possible using the Bahtinov star diffraction spike method, you can lock the telescope focuser in place using the thumbscrew in the underside of the tube. Don’t forget to take the Bahtinov mask off before capturing your light frames! (I’ve made this humbling mistake before)

To retain focus throughout the night, you may need to re-focus later on, especially if the temperature has dropped significantly. A motorized focuser such as the Pegasus Astro model I demoed over the winter makes this task much easier by allowing you to make micro-step adjustments via software on your computer.

Related Post: Focusing Tips for Astrophotography

Step 10: Setting an Imaging Sequence

With the star alignment and focus routine out of the way, we can now slew to our deep-sky target for the night.

Certain targets are better choices than others depending on your imaging conditions, moon phase, camera sensor size, telescope, filters etc. Over time, you’ll learn what your particular gear is best at, and set your self up for success whenever possible.

The camera I am using tonight is known as a one-shot-color camera. It shoots images in broadband true color, using a sensor that collects light in RGB simultaneously. A monochrome camera is capable of collecting more signal (light) at once, but a filter wheel is needed to conveniently capture each color channel needed to produce a full-color image.

This camera is called the ZWO ASI294MC-Pro. It includes a cooling feature that keeps the internal sensor cold during long exposures. This is important because a hot sensor means more noise. Noise is the little pixels and artifacts that can really make a mess of your image. With a cool sensor, you’ll be able to create images with a much better signal-to-noise ratio.

astronomy camera

The ZWO ASI294MC-Pro One-Shot-Color Camera

For those shooting with a DSLR camera:

If you’re shooting deep sky astrophotography with a DSLR, the process is slightly different than the way I have featured in the video. This is particularly evident when it comes to the focus, framing, and imaging sequence setup.

With the DSLR attached to the telescope via a t-ring and adapter and/or field flattener (these adapters are usually 0.8X and both reduce the focal ratio of the telescope, and “flatten” the field of view), you’ll want to frame up your target just as you would with a dedicated astronomy camera.

The camera and telescope will need to be in focus before attempting to frame your target, and you have a few options here. One option is to focus on a star using live view on the camera itself before connecting to APT. A high ISO (1600+) is recommended while focusing and framing as it will produce the brightest stars for reference purposes.

You could also use the “live view” mode in APT. A short exposure of 4-5 seconds should be long enough to focus using a Bahtinov mask. Then, you can use a longer exposure loop to frame your deep-sky object.

Set the exposure length to about 5-10 seconds, using an ISO of 1600 or more. (6400 works well for this step). This should pull in enough stars to orientate your subject, even with a strong filter in front of the sensor. (Such as a clip-in Ha filter)

Step 11: Recommended Filters

From my city backyard, filters are necessary to capture any sort of usable image. If I want to shoot a true-color image with this camera, a light pollution filter will help ignore many of the wavelengths of light associated with things like streetlights and porch lights. My backyard is located in the center of town, rated a class 8 on the Bortle Scale.

Even then, extensive image processing must be done to separate the deep sky object from the bright sky. It’s the price we pay for being able to enjoy this incredible hobby from the comfort of our backyards.

Tonight, I’ll be shooting with a much stronger filter. It will ignore all wavelengths of visible light except for 2 very narrow bandpasses.

The STC Astro duo narrowband filter collects the light associated with Hydrogen-alpha and Oxygen only. For certain emission nebulae, it can produce jaw-dropping images in even the heaviest of urban light pollution.

The Eagle Nebula

The Eagle Nebula using the STC Astro Duo-Narrowband Filter

Step 12: Slewing to Target

With everything balanced, aligned, and ready to go, we can now hop into the camera control software to set up an imaging sequence.

The target I have chosen to shoot is the Butterfly Nebula in Cygnus. It rises above my house by 10 pm and I ‘ll track it along the sky until morning. I’ll need to perform a meridian flip when the mount reaches the Zenith, which just means the telescope needs to switch sides and start tracking again.

deep sky target

For narrowband images like the one I’ll share in this post, you’ll want to use a longer exposure than you would when shooting in color.

I’ll tell the software to shoot 40 x 6-minute images. To make sure that each one of these 6-minute subs is sharp, I’ll turn on the autoguiding system.

Step 13: Autoguiding

For autoguiding, I use free software called PHD2 guiding. This tool runs my little guide camera, the Altair Astro GPCAM2. It houses a small mono sensor with one job – to follow a single star all night.

The software will communicate with the mount to make the small adjustments needed for improved tracking accuracy. I can also leverage a feature called dithering, which reduces overall noise in your stacked image by slightly shifting the position between each frame before capturing.

A way to know if your guiding is “good” or not is to view the graph tool in PHD2 guiding. A smooth graph will have a total RMS error under 1 second, as seen in the screenshot below.

PHD2 Guiding Graph

Helpful resource: Analyzing PHD2 Guide Logs

Step 14: Capture Your Deep Sky Target

Here are the individual steps I take to set up a complete imaging sequence in APT with PHD2 guiding.

  1. Connect camera (ASI driver)
  2. Choose “unity gain” setting
  3. Connect mount (iOptron Commander)
  4. Use live-view with Bahtinov mask
  5. Center 3-star alignment stars
  6. Focus on alignment star using star diffraction spike pattern
  7. Remove Bahtinov mask
  8. Slew to target
  9. Set cooling to -20 (Cooling-Aid)
  10. Slew to target
  11. Adjust target framing using 20-30 second live view loop
  12. Run and calibrate PHD2 guiding
  13. PHD2 guiding with smooth graph
  14. Ensure dithering is active
  15. Start imaging plan (eg. 30 x 300-second subs, Binned 2×2)
  16. Grab a beer and watch each image appear!

Here is the image I captured using this setup on the night I recorded the video. The image includes just over 6 hours worth of total integrated exposure time using 6-minute images.

After collecting all of my light frames for the image, I took 20 dark frames that I’ll use during the stacking process. Dark frame subtraction is the process of defining the digital noise created by the camera sensor, and removing it from your final image.

The images were stacked in DeepSkyStacker to improve the signal-to-noise ratio before being processed in Adobe Photoshop to pull out more color and detail.

IC 1318 - The Butterfly Nebula

The Butterfly Nebula is located in the Sadr Region of Cygnus and is an excellent astrophotography target to capture in narrowband hydrogen-alpha.

Final Thoughts

If you’re brand new to astrophotography, I hope you now have a better understanding of the process involved in capturing deep-sky objects through a telescope. It may seem like a lot to take in all at once – because it is!

The good news is, if you are dedicated and passionate about astrophotography, small victories and improvements along the way are all you will need to keep going.

I certainly didn’t get to where I am at today in a hurry. Why would I rush through something I absolutely love doing?

My final advice to you would be to be patient and remember to enjoy each small victory along the way. The night sky is not going anywhere, and you have the rest of your life to explore it.

Helpful Resources:

astrophotography step-by-step guide

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

15 Comments

  1. Trevor, your methodical, logical, and personal guides are unique among the many how-to astrophotography blogs, podcasts, and videos.

    Consider packaging these into a collection which people could acquire …. perhaps for a small fee or donation to support your efforts and recognize your personal investment in time and effort.

    In the meantime I look forward to your next posting on one of the many media you employ to help the rest of us.

    I myself am “returning” to astronomy. After decades my Meade 2120 10” is seeing the night sky once again. Very old school platform which makes one appreciate the evolution of our shared passion. Long exposure single image on 35 mm Kodak special PAN film in a cold camera vs your more modern approach is a big step!

  2. Hey Trevor,

    I followed U und UTube since I have started with Astrophotography. You did a great job with all of your stuff! If I can made a suggestion to your guide.. add for DSLR users the bias, darks and flats to get also great pictures from a noisy image. Wish you good luck, have a nice day and greetings to Rudy 😉 -T-

  3. Hey Thorsten – thanks so much for the suggestion. You’re the second person to mention the lack of DSLR advice on this post – I’ll be adding a huge section that includes the support files this week. Thanks again – I will tell Rudy you say hello 🙂 🐶

  4. Thank Tom. I really respect guys like you that tackled this hobby using a film camera – I can’t even imagine the extra hurdles involved having to develop the film before seeing your results. As for packaging up a course/book, its something I am getting closer to executing on. Until then – I really enjoy sharing everything I’ve learned here on the blog and on YouTube. Thanks again, and clear skies!

  5. Trevor I too have followed you on You-tube since I have started astrophotography and now on FB and here on Astrobackyard.com. You give us plenty of information on how to get started. As far as your post I have to agree with Thorsten I would like to see or read more suggestions on shooting with a DSLR to get better photos. Which most of us starting out are using. Also like to see a video on how to properly align your polar scope to your mount for better tracking for those of us without a guide scope.Thanks again for all you do and keeping us all going in the right direction. Hope to see you again at Cherry Springs and as always clear skies to ya.

  6. Trevor–very nice job describing your process at a reasonable level of detail. You could have really gotten down to the nitty gritty details, but that would not have necessarily been useful because different equipment would require slightly different processes. The only thing you might have discussed was the additional images you take (darks, flats and bias).

    As a suggestion for future videos, maybe you could walk through your APT work? Existing YT videos are somewhat dated. Clear skies!

  7. Thanks for the feedback Jack – very much appreciated. Good call on an updated APT walkthrough – much has changed indeed. Clear skies!

  8. Hi Trevor, I’ve been following your work for about 9 months, and it’s your presentations that has inspired me to take this up as new hobby. If by chance you ever need/want a helping hand to put your “Live” shows together,… or if you organize a local star party, I would be grateful just to get out for a learning experience.
    Keep up the fine work.

    Rich Hoff (just down the road in the “Hammer”)

  9. Excellent tutorial! Inspired by your review of ASI294MC PRO, I bought one to wet my feet in astro-photography, using EdgeHD 800 on CGEM II with no focal reducer. So far no success of capturing any DSO, only got some not so great planetary images of Jupiter, Saturn etc. I live at California Bay Area, with decent amount of light pollution. My challenge is to figure out the correct exposure, gain and offset. What I understood that jack up the gain to max and reduce the exposure while slewing to the target to see visually on the laptop screen. Once on target, reduce gain, increase exposure and shoot number of frames, end with few dark frames and stack. None of my plates are showing any nebulosity, so I might have under expose the lot. I will request you to do a live tutorial using a small aperture long focal length SCT like edgehd 800 with ASI294MC Pro to show us how you set the camera to visually slew to the target and then change the exposure setting to take the image stack. Any DSO target is fine. We will be able to see how you de-bayer the images, stack them and apply wavelet by using free tools like sharpcap, PIPP, Registax or DSS. If you already have such a tutorial write-up or video, then please point me to that.

    Many thanks for your wonderful tutorials.

  10. My request…and I’m sure you’ve already written it up….but if not, how to step-by-step image a deep space object with a minimal setup, i.e. small scope like the Redcat 51, non tracking–just a skytracker to increase exposure time.

  11. Hi Trevor,
    I Really enjoyed all your you tube videos and trying things out with my telescope. I have a southern polar scope and want to know how to align the north star with it with out having to buy another polar scope.
    Your you tube videos really help alot, thanks for making them.

    Regards
    Gary

  12. Guiding – Do you choose a star as close to the DSO you want to image or does it matter as long as that star is in the same FOV?

  13. Hi Trevor,

    In my view, there is only a small handful of people providing detailed guidance on how to actually accomplish the finer points of astrophotography (with an eye toward frugality). I feel strongly that if you compile a book, it will be well received. I know it will by me and the folks above who have previously remarked. You surely have enough quality data to pull from, and a good base of supporters. The trick would be your niche, which I believe is already settled. 🙂

    I wish you the best in these endeavors!
    Mitch

  14. Thank you so much for putting this guide together. As someone who is just getting into astronomy again and very interested in eventually learning astrophotography, it was very helpful. I’m pretty sure I understood 4% of of what you said, but it’s a start :-).